4015A（500V / 20A）AC/DC Digitizing Power Meter

（Includes THD measurement）1~4CH
（Includes 200Ap electronic switch + 200A Inrush current measurement + THD measurement）

Description

• 4015A Digital Power Meter is designed to measure the power line parameters of AC / DC and DC / DC power supply. It is suitable for AC / DC Adapter, Charger, Quick Charger, LED Driver and DC / DC Converter. It is also suitable for uninterruptible power supply UPS, Regulators AVR, Inverter, batteries, AC / DC power supply / components ... and other applications.
• 4015A digital power meter has three input source selection switch internally, according to the test needs to program that one of as input of the power meter.
• Each channel of 4015A digital power meter has a 200Apeak power MOSFET switch parallel relay switch as the output switch, it can adjustable output on / off and AC any angle, used to test the Inrush current and Hold up time.
• 4015A digital power meter contains 1 ~ 4 channels digital power meters, each power meter has a group of high-speed 16-Bits A / D Converter, sampling the voltage and current signals respectively. After the conversion, the data is calculated by a high-speed DSP processor. After calculation is completed, the data is transmitted to the host processor and read the relevant information through the RS-232 interface.
• The 4015A has a built-in 4-channel stand alone AC Source / AVR selector switch and output a 200Apeak, 0 ~ 360º ON / OFF high-speed switch that turns on the power to be tested one by one and accurately measures Inrush currents up to 200A peak.

Features

• Suitable for ATE: 500V 20A, 10000W AC/DC Digital Power Meter。
• Voltage Range：15 / 30 / 50 / 150 / 300 / 500Vrms
• Current Range：0.02 / 0.05 / 0.2 / 0.5 / 2 / 5 / 10 / 20Arms、200Apeak（for Inrush）
• 0.1% high accuracy
• Measure AC / DC voltage, AC / DC current, AC / DC power, AC power factor, AC frequency, Inrush current and V/A Harmonic parameters.
• Measure voltage / current harmonics up to 50^th order, and total harmonic distortion .
• Frequency range DC、40~70Hz。
• Measuring module: 1 ~ 4CH, standard is 4 channels, option 1, 2, 3 Channel is available。
• The built-in internal low-pass filter (50KHz) can eliminate unnecessary high-frequency interference
• With AC, DC, AVR 3 sets of power input, through the control of choice of input power to achieve AC / DC or DC / DC test flexibility.
• With 0 ~ 360º 200Apeak output switch, can control the output on / off angle, you can accurately measure the Inrush current.

Specifications